Description
Install a digital temperature controller into your analog smoker; or replace an existing controller on your digital smoker with this temperature controller from Novus. This digital controller can be used for any heating or cooling application and is programmable to 1/10 of a degree. Display temperature in Fahrenheit or Celsius scale.
Gross Dimensions: 3″ D x 3 1/2″ W x 1 1/2″ H (Note: A minimum additional 1″ of depth and 1″ of width must be added for clearance of wires and also side mounting tabs).
Mounting Hole Dimensions: 2.78″ W x 1.11″ H.
Sensor Wire Length: 58″.
Mounting Hole Required For Sensor: 1/4″ Dia.
Voltage: 110V/220V compatible.
Output: 16A (13A max continuous recommended).
Wiring not included
Darrell Newton (verified owner) –
Works great!!!
John Schulte (verified owner) –
Talked to Magan on wiring help on the controler. She said that the control was only used on electric smokehouses. She sent me the pictures of the control wiring witch solved all the problems. I installed it on my natural gas fired smoker (your kit) it worked perfectly.You might consider sending the wiring pictures along with controler purchases.
thank you John
Terry Scott (verified owner) –
I had the older controller that only when to 200 degrees and I wanted to upgrade so I could do pork butts and ribs at a little higher temp.