Install a digital temperature controller into your analog smoker; or replace an existing controller on your digital smoker with this temperature controller from Novus. This digital controller can be used for any heating or cooling application and is programmable to 1/10 of a degree. Display temperature in Fahrenheit or Celsius scale.
Gross Dimensions: 3" D x 3 1/2" W x 1 1/2" H (Note: A minimum additional 1" of depth and 1" of width must be added for clearance of wires and also side mounting tabs)
Mounting Hole Dimensions: 2.78" W x 1.11" H
Sensor Wire Length: 58"
Mounting Hole Required For Sensor: 1/4" Dia.
Voltage: 110V/220V compatible
Output: 16A (13A max continuous recommended)
Wiring not included.